CORN STREAM Corn Harvesting Headers
Corn Stream is a series of new-generation corn headers for high-performance harvesters. Any header of this series is notable for a number of technical solutions that allow it to be used for harvesting various types of corn, regardless of soil fertility.
Gearboxes with integrated rolls that do not require additional adjustments made it possible to almost double the header's performance. Depending on the conditions of harvesting, quick-release “cutting” rolls with eight cutting edges or “pulling” rolls with eight additional blade ends can be installed on the header.
The special design of the rolls makes the header suitable for harvesting tall-growing as well as laid or low-growing varieties. Additional side shields and an active divider reduce the loss of high-growing and weak corn.
The Corn Stream is equipped with a reinforced chopper with an increased speed of knives rotation and a labyrinth seal of the gearbox bearing; position of the shredder makes it possible to remove cobs at a height of 30 cm and simultaneously chop the stems with almost no losses.
Capacity up to 70 t/h
Chopper 70 сm
2 years warranty
Benefits of the Corn Stream
1. Operation with low-growing crops
The chopper positioned in the front part of the header allows to remove cobs at a height of 30 cm with simultaneous chopping of the stems with almost no loss. The distance from the chain lugs to the soil surface is 12cm, and the increased length of the feeding chains is optimal for working with laid and low-growing plants.
2. Operation with a variety of crops
Depending on the harvesting conditions, quick- release “cutting” or “pulling” rolls with a working length of the blades’ edges of 500mm can be installed on the header. This allows to harvest high-growing, wet and foul corn without reducing the operating speed.
3. Loss reduction
The increased diameter of the feed auger, 460mm, increases the capacity of the header. Additional side shields reduce losses when harvesting high- growing and weak corn.
4. Reliable chopper
The Corn Stream is equipped with a reinforced chopper with an increased speed of knives rotation and a labyrinth seal of the gearbox bearing. Cutting elements have tungsten carbide surfacing, which significantly increases the wear resistance of the blades.
5. Reliable protection
In case of extreme situations and unacceptable overdrive, reliable protection of the operating elements is ensured by safety devices installed on drive cardan shafts, an auger drive and on each gearbox of the snapping unit.
6. High maintainability
If the knives are damaged during operation, do not remove the shredder but just release the bolt, remove the sleeve and replace the cutting element.
* * The information published on this site is for informational purposes only, not a public offer.