Gentle threshing for any application
440 440 h.p.
Gentle threshing for any application
performance up to
40 40 tons/hour
tank capacity
10500 10500 l
Gentle threshing for any application
season capacity up to
2000 2000 ha
Professional Agrotechnics
General description
  • power
    440 440 h.p.
  • performance up to
    40 40 tons/hour
  • tank capacity
    10500 10500 l
  • season capacity up to
    2000 2000 ha
TORUM 750 is designed for harvesting all traditional grain crops, such as spiked cereals, legumes, oil crops, cereal and arable crops. It is an efficient machine with an output of up to 40 tons of grain crops per hour (basic time), capable of cutting crops in an area of up to 2000 ha per season.

Key features

alt text

High performance

The concave area on the rotary combines with a fixed concave is not used to its full extent, reducing the potential performance. In addition, when harvesting damp crops or rice, the top of concave becomes plugged (the so-called dead zone).
The rotating concave allows using 360° of the concave surface and avoiding dead zones and the rotor plugging.
Unique threshing system Advanced Rotor System (ARS) — rotor with a rotating concave
The rotor, 3200 mm long and 762 mm in diameter, provides a threshing and separation area of 360 degrees — as much as 5.4 sq.m. The concave forms three threshing sections, allowing to set the clearance in one cross section. So, in one rotor revolution the heap is threshed not once, but three times. In addition, the concave design allows setting increased clearances.

No additional adjustment of concave is required depending on crop harvesting conditions: for crops from barley to wheat, the threshing clearance is set between 16 and 25 mm.
Large threshing and separation area
TORUM 750 comes with inline 6-cylinder Cummins engines. Powerful and compact, these engines have good fuel consumption and torque reserve.

The air cleaning system uses an air intake screen with forced rotation (by a hydraulic motor), which significantly reduces the maintenance effort. A special rotating vane between the coolers provides their self-cleaning, increasing the useful operating time.
A high-power and fuel-efficient engine 440 h.p.

Comfortable in use

TORUM 750 combines are equipped with Comfort Cab II. Climate control, cab noise insulation and suspension system, air-suspended operator's seat, additional assistant’s seat, beverage cooler, Adviser IV voice information system, and Agrotronic Agromanagement platform come in basic configuration.
Adviser IV voice information system continuously monitors the threshing process and the functioning of combine mechanisms, allows to monitor the process stability and prevent the failure of units.
Comfort Cab II cab with Adviser IV information system

Important details

The feeder house beaters spread and accelerate the compressed crop material before it enters the rotor. The implemented Feed & Boost principle ensures the process stability and low energy consumption of the unit. The advantages of the feeder house are especially clear when working with uneven windrows, or moist and weedy crops. Experience shows that unlike conventional slat conveyors, such a scheme increases the feeder house throughput by 20%, while the power consumption is reduced by 15%.

For TORUM 750, a combine version with improved chain slat type feeder house (with for/aft tilt) is available as well. This function is of particular help when harvesting soybeans and corn.
FEED & BOOST feeder house
The clean grain goes into a 10,500 l grain tank. This capacity increases the performance by reducing the unloading cycles.
The unload rate is 105 l/s, the full grain tank is discharged within 2 minutes. The unloading auger length is now increased to 5.7 m, the unload height is 5.2 m, the reach angle is 105 degrees. This allows an easy unloading of grain into any truck or trailer, even when a 11 m header is used. When harvesting rice, unloading can be done without leaving the bay.
An unloading and rear view video monitoring system is available as an option (e.g., for unloading on the move).
Quick unloading
The rotor is driven by a hydraulically controlled planetary CVT (continuously variable transmission) — a unique hydromechanical device that combines the advantages of both types of drives: smooth and accurate speed control, high bearing force, and reliable beltless transmission.
All this produces a very high torque (up to 1500 Nm) for an effective work in harsh conditions.
CVT rotor drive

More opportunities

Depending on the version, the basic package includes an optical tailing elevator crop flow sensor (monitoring the flow through the tailings elevator). This offers a convenient way for the operator to monitor the operation of threshing and cleaning systems. The amount of incoming material is displayed in Adviser IV as absolute and relative values.
RSM tailing elevator crop flow sensor (1)
The system automatically controls the machine ground speed depending on crop yield, engine load, thresher and shoe losses, and rethreshing percentage, based on the settings made by the operator, in either of two modes:
  • constant preset speed;
  • constant preset feeder house load, with ground speed adjusted automatically for consistent thresher loading in varying field conditions
The system uses the data from the combine standard sensors, the tailings elevator load sensor, and the load sensor at the feeder house (monitoring the feeder house drive belt tension).
RSM adaptive cruise control (option) (2)
The system provides automatic change of the cleaning fan speed and the gaps between the combs of the upper sieve and extension to compensate for the longitudinal slope of the field:
  • when moving uphill, the fan speed is automatically reduced, and the gaps of the sieves increase;
  • when going downhill, the fan speed is automatically increased, and the sieve gaps are reduced.
4D longitudinal slope compensation system (option) (3)


Power Stream header, 6 /7 / 9 m
Cutterbar drive based on planetary gear case
Knife speed [stroke/min] 1 180
Reel-to-ground speed synchronisation system
Float Stream 700/900 close-cut header with flexible cutterbar, 7/9 m
Argus 870/1270 corn header, 8/12 rows
Falcon 870/875/1270/1275 sunflower header, 8/12 rows
Sun Stream 1200/1050/920/780 sunflower header, 12/10.5/9.2/7.8m
Swa Pick 342/432 windrow pickup, 3.4/4.3m
Electrohydraulic ground contour following system
Crop lifters
Header trailer
Cart hitch
AFH feeder house (harvester version)
Conveyor-type feeder house (harvester version)
Thresher width [mm] 1 500
Stone trap
Advanced Rotor System (ARS)
Rotor diameter [mm] 762
Total rotor length [mm] 3 200
Rotor drive hydromechanical
Rotor speed [rpm] 250 to 1 000
Concave wrap angle [deg.] 360
Total threshing and separation area [sq. m] 5.40
Cleaning sieve area [sq. m] 5.20
Cleaning fan speed [rpm] 335 to 1 050
In-cab electrical adjustment of sieves
Self-contained rotor-type rethresher
Grain tank capacity [L] 10 500
Minimum unload rate [L/s] 105
Unload height [mm] 5 200
Vibrating agitators
Attachments for cop residue management 2-speed chopper/spreader, integrated chaff spreader
Comfort Cab II specification
Adviser IV information system
Automatic guidance system
Yield and moisture mapping system
Unloading area and rear view video monitoring system
Automatic Centralized Lubrication System
Transmission hydrostatic
Transmission 3 speeds
Road speed [km/h] 0 to 27
Drive wheel tyre type 30,5LR32
Rear wheel tyre type 18.4R24
Removable tracks

(Stage 0)

Power rating [kW (h.p.)]

324 (440)

Fuel tank capacity [L]


Fuel meter system
Air compressor
Length/width/height (in the transport position, without header) [mm] 8 931 / 3 677/ 3 950
Weight (standard version, without header and fuel) [kg] 16 350 ± 490
  • Standard
  • Option
  • Not available

Leasing is an effective and attractive way of acquiring Rostselmash equipment.

Rostselmash Finance partner leasing companies can offer you programs to purchase agricultural machinery on the most favorable terms.

Exclusive leasing programs are also available. To get an individual financing offer contact your nearest Rostselmash dealer.

One of the most convenient and cost-effective ways of becoming the owner of Rostselmash agricultural equipment is to secure a loan from a bank.

Rostselmash Finance partner banks can offer you a wide range of loan programs tailored to your preferences and needs for purchasing Rostselmash agricultural equipment on the most favorable terms.

Contact your nearest Rostlsemash dealer to get an individual lending solution as well as necessary consulting support.

Rostselmash Finance partner insurance companies prepared for you the most comprehensive and cost-effective protection against a wide range of damage to your agricultural equipment. 

You can get more information about insurance programs from your nearest Rostselmash dealer.

Integral and trailed implements

For better equipment performance, we recommend using branded implements

Find a dealer nearby
Buhler Versatile Inc.
British Columbia, Winnipeg, Clarence, 1260

Warranty and service

Service for lower future costs

  • Wide network of service and sales partners you can rely on
  • Long commitment for proper warranty and post-warranty repairs in shortest time possible
  • Skilled personnel, special instruments and equipment, outfitted service facilities
warranty period
2 2 years or 600 hours
support during harvest season
Application for equipment
Application for equipment
Your region America?