power from
330
330
h.p.
performance up to
120
120
tons/hour
Professional Agrotechnics
General description
-
power from330 h.p.
-
performance up to120 tons/hour
-
fuel consumption0.76 l/t
-
fodder harvested per season12000 tons
RSM F 1300 is a new forage harvester featuring an advanced forage harvesting technologies and a laconic simplicity of design. The new cutterhead provides a high (up to 85%) evenness of cutting lengths, improving the forage intake by animals. With the shortest path in its class, the combine’s energy efficiency has been greatly improved.
Key features
Excellent forage quality
An increased feed rolls diameter provides for a higher throughput of the combine, ensuring an even crop flow entering the chopper.
Four springs with a compacting force of 3500 kg ensure a dense flow of the material and an even cut.
The hydraulic roll damper absorbs impact loads, improves the performance of stone detector, prevents damage to the rolls and feederhouse frame, and provides additional pressing of crop material.
Four springs with a compacting force of 3500 kg ensure a dense flow of the material and an even cut.
The hydraulic roll damper absorbs impact loads, improves the performance of stone detector, prevents damage to the rolls and feederhouse frame, and provides additional pressing of crop material.
Thanks to a new cutting drum with four rows of knives arranged in a chevron pattern, crop material alignment and clean cut are ensured. Such design prevents any displacement of the knives, protecting the rotor from damage, and reduces the knife replacement costs.
Automatic adjustment of the drum floor prevents the crop material from recycling and allows obtaining the length of cut uniformity >85%. New sharpening device increases the knife sharpening speed twice — the highest cutting quality with no time lost.
Automatic adjustment of the drum floor prevents the crop material from recycling and allows obtaining the length of cut uniformity >85%. New sharpening device increases the knife sharpening speed twice — the highest cutting quality with no time lost.
Two rolls 190 mm in diameter with saw-like teeth and a 20% difference in rotational speed ensure 99.9% grain cracking. For a more aggressive cracking, kits increasing difference between roll speeds to 30% or 40% are available for order.
The kernel processor is engaged by a hydraulic drive. The new slider design of the kernel processor does not require uninstallation when switching to grass harvesting.
The kernel processor is engaged by a hydraulic drive. The new slider design of the kernel processor does not require uninstallation when switching to grass harvesting.
Tried and true YaMZ 238DE V8 330 h.p. turbocharged diesel engine.
- wide use of these engines and their modifications guarantees simple and affordable maintenance;
- transverse engine mounting for best weight distribution.
Versatility
- with knives arranged in four rows, half of the knives can be removed to double the range of cutting lengths;
- special knives for corn (optional) increase the evenness of cut lengths for a better forage compaction in the pit, ensuring its integrity. Reduced amount of fine particles also increases the forage intake by animals.
- the recutter floor (optional) helps prevent any unchopped dry leaves, ensuring no forage loss in the pit;
- kernel processors with 190 mm (optional) roll diameters and a 20% (basic package), 30% or 40% (optional) difference in rpm allow choosing the required configuration depending on the crop features and harvesting technologies.
- small grain silage — a header is available for small grain silage harvesting — with a segmented knives cutterbar. Kernel processor with 190 mm rolls cracks the grain perfectly, improving forage digestibility;
- grass — a pickup or a direct-cut header and grass knives (basic package) as well as a hydraulic damper of feed rolls and an automatic cutterhead floor adjustment guarantee easy grass harvesting on fields of any yield;
- corn — 4.5 m corn header (6 rows). Corn knives (optional) increase the evenness of length of cut, improving the forage integrity and its intake by animals. A roller-type kernel processor ensures 99.9% cracking of corn grains, improving forage digestibility.
Comfort operation
The operator’s ergonomic station provides the operator with a high level of comfort. An adjustable seat and a steering column ensure the best posture. The controls are easily accessible on the panel and on the joystick to the right of the seat.
- adviser II information system provides the required information on the combine’s performance, permitting to monitor the harvesting process stability and optimum operation of the main assemblies;
- the basic package includes an air conditioner, a beverage cooler, and an audio system;
- panoramic windows for excellent viewing.
The image from the camera on the spout (or from the camera on the rear hood when moving backwards) is shown on the display.
- reduces losses of the chopped material thanks to a more convenient control of crop flow from the spout;
- reduces operator fatigue, allowing simultaneous control over the combine movement and crop unloading.
Simple design
The feed rolls drive gear case is belt-driven from the chopping rotor's shaft. This simple solution allows synchronising the speed between the rolls and the rotor, and maintaining a constant cutting length under any load.
A simple and reliable Rostselmash feed rolls gear case allows selecting one of the cutting lengths: 6, 11, 15, or 26 mm.
A simple and reliable Rostselmash feed rolls gear case allows selecting one of the cutting lengths: 6, 11, 15, or 26 mm.
Passive vertical terrain following by means of hydraulic accumulators allows to compensate for ground irregularities of up to 250 mm. A spring-loaded tilt frame on the feeder house allows horizontal following on fields with uneven terrain. Interconnected operation of the two terrain following systems guarantees complete windrowing without skips and losses.
Specifications
| Manufacturer/model |
YAMZ |
Cummins |
Cummins |
| Engine type |
238DE2 |
QSL-8.9 |
L 9 |
| Rated power, h.p. (kW) |
330 (243) |
360 (265) |
430 (321) |
| Cylinders |
8, V |
L6 |
L6 |
| Displacement [L] |
14.86 |
8.9 |
8.9 |
| Fuel tank capacity [L] | 750 | ||
| AdBlue tank capacity with St V [L] |
- |
- |
95 |
| Air compressor |
|
||
| Width [mm] | 680 |
| Number of rolls | 4 |
| Feed roll drive | mechanical |
| Reverse | hydraulic |
| Length of cut adjustment | stepped |
| Length of cut range, w/32 knives [mm] | 6 / 11 / 15 / 26 |
| Metal and stone detector with autostart |
|
| Feed roll frame opening | swing away |
| Longitudinal / transverse ground contour following system |
|
| Header attachment system | quick mounting and fixing device |
| Header drive | mechanical |
| Diameter/width [mm] | 630 / 703 |
| Number of knives (standard) | 48 |
| Speed [rpm] | 1 200 |
| Semi-automatic knife sharpening system controlled from the cab |
|
| Automatic shear bar adjustment controlled from the cab |
|
| Automatic cutterhead bed clearance adjustment |
|
| Set of corn knives |
|
| Cutterhead recutter floor |
|
| Grater-type cutterhead floor |
|
| Kernel processor |
|
| Type | Removable, roll |
| Tooth profile |
Sawtooth |
| Tooth profile |
X-serrated for Shredlage technology with X serrations and sawtooth with 5 °-inclined sawtooth |
| Roll diameter [mm] | 190 |
| Rotation speed Δ [%] |
20 |
| Rotation speed Δ [%] |
30 or 40 |
| Blower rotor diameter [mm] | 540 |
| Rotor speed [rpm] | 2 400 |
| Spout rotation angle [deg.] | 210 |
| Anti-collision device |
|
| Spout extension sections |
|
| Spout section [mm] | 720 |
| Tank for concentrated inoculant [L] |
20 (2 x 10) |
| Tank for diluted inoculant [L] |
390 |
| Truck filling and rear view video monitoring system |
|
| Automatic centralised lubrication system |
|
| Remote monitoring |
|
| Transmission | hydrostatic |
| Gearbox control method | mechanical |
| Park brake control method | mechanical |
| Road speed [km/h] | 25 |
| Front tyres, standard | 605/65R26 |
| Front tyres, option | 750/65R26 |
| Rear tyres, standard | 18.4-24 |
| Rear axle drive | version |
| Drawbar hitch with autolock |
|
| Comfort Cab specification |
|
| Air-conditioning, heater |
|
| Sun blind |
|
| Beverage cooler |
|
| Adviser II information system |
|
| Length/width/height [mm] | 6 860 / 3 227 / 3 866 |
| Corn header [m] (rows) | 4.5 (6) |
| Grass header [m] | 5 |
| Pickup [m] | 3/4 |
- Standard
- Option
- Not available
Financing
Leasing is an effective and attractive way of acquiring Rostselmash equipment.
Rostselmash Finance partner leasing companies can offer you programs to purchase agricultural machinery on the most favorable terms.
Exclusive leasing programs are also available. To get an individual financing offer contact your nearest Rostselmash dealer.
One of the most convenient and cost-effective ways of becoming the owner of Rostselmash agricultural equipment is to secure a loan from a bank.
Rostselmash Finance partner banks can offer you a wide range of loan programs tailored to your preferences and needs for purchasing Rostselmash agricultural equipment on the most favorable terms.
Contact your nearest Rostlsemash dealer to get an individual lending solution as well as necessary consulting support.
Rostselmash Finance partner insurance companies prepared for you the most comprehensive and cost-effective protection against a wide range of damage to your agricultural equipment.
You can get more information about insurance programs from your nearest Rostselmash dealer.
Find a dealer nearby
Buhler Versatile Inc.
Warranty and service
Service for lower future costs
- Wide network of service and sales partners you can rely on
- Long commitment for proper warranty and post-warranty repairs in shortest time possible
- Skilled personnel, special instruments and equipment, outfitted service facilities
warranty period
2
years
support during harvest season
24/7
Get a presentation
We’ll send the presentation
to provided e-mail
to provided e-mail
RSM F 1300
power from 330 h.p.
performance up to 120 tons/hour
fuel consumption 0.76 l/t
fodder harvested per season 12000 tons