TORUM 770/785
Gentle threshing for any application
power
520 520 h.p.
TORUM 770/785
Gentle threshing for any application
performance up to
45 45 tons/hour
tank capacity
12000 12000 l
TORUM 770/785
Gentle threshing for any application
season capacity up to
2000 2000 ha
Professional Agrotechnics
General description
  • power
    520 520 h.p.
  • performance up to
    45 45 tons/hour
  • tank capacity
    12000 12000 l
  • season capacity up to
    2000 2000 ha
TORUM 785 is designed for harvesting all traditional grain crops, such as spiked cereals, legumes, oil crops, cereal and arable crops. It is an efficient machine with an output of up to 45 tons of grain crops per hour (basic time), capable of cutting crops in an area of up to 2000 ha per season.

Key features

alt text

High performance

The concave area on the rotary combines with a fixed concave is not used to its full extent, reducing the potential performance. In addition, when harvesting damp crops or rice, the top of concave becomes plugged (the so-called dead zone).

The rotating concave allows using 360° of the concave surface and avoiding dead zones and the rotor plugging.
Unique threshing system Advanced Rotor System (ARS) — rotor with a rotating concave
The rotor, 3200 mm long and 762 mm in diameter, provides a threshing and separation area of 360 degrees — as much as 5.4 sq.m. The concave forms three threshing sections, allowing to set the clearance in one cross section. So, in one rotor revolution the heap is threshed not once, but three times. In addition, the concave design allows setting increased clearances.

No additional adjustment of concave is required depending on crop harvesting conditions: for crops from barley to wheat, the threshing clearance is set between 16 and 25 mm.
Large threshing and separation area
TORUM 785 comes with inline 6-cylinder Cummins engines. Powerful and compact, these engines have good fuel consumption and torque reserve.

The air cleaning system uses an air intake screen with forced rotation (by a hydraulic motor), which significantly reduces the maintenance effort. A special rotating vane between the coolers provides their self-cleaning, increasing the useful operating time.
A high-power and fuel-efficient engine 520 h.p.

Comfortable in use

TORUM 785 combines come with a new second-generation Luxury Cab. The major difference between the new Luxury Cab and the proven Comfort Cab II is the size: the new one is more than 1.5 times bigger, with more than 4 cu.m of volume, more than 2 m wide, and a window area greater than 5 sq.m.

Additional benefits include climate control, improved noise insulation and suspension for the cab, a large air-suspended operator's seat, an additional larger seat, electrically adjusted and heated rear view mirrors.

The beverage cooler also has a larger capacity. Adviser IV voice information system and Agrotronic Agromanagement platform come in basic configuration.

For the operator’s comfort, TORUM 785 is equipped with bright LED lights, this is a new configuration standard for high-performance machines.
Luxury Cab featuring Adviser IV information system

Important details

A new generation feeder house significantly increases the combine functionality and operational comfort for different crops.

The basic configuration features a single-point hydraulic multicoupler, adjustable for/aft tilt for higher performance and ease of work with all crops without the need to convert, with quick connection of adaptors (for the headers weighing up to 4500 kg).

The power to the header drive was almost doubled to properly handle 12-row corn headers.
High-capacity feeder house
The clean grain goes into a 12,000 l grain tank. This capacity increases the performance by reducing the unloading cycles. The unload rate is 120 l/s, the full grain tank is discharged within 2 minutes. The unloading auger length is now increased to 7.5 m, the unload height is 5.4 m, the reach angle is 105 degrees.

This allows an easy unloading of grain into any truck or trailer, even when a 14 m header is used. When harvesting rice, unloading can be done without leaving the bay.

An unloading and rear view video monitoring system is available as an option (e.g., for unloading on the move).
Quick unloading
The rotor is driven by a hydraulically controlled planetary CVT (continuously variable transmission) — a unique hydromechanical device that combines the advantages of both types of drives: smooth and accurate speed control, high bearing force, and reliable beltless transmission. All this produces a very high torque (up to 1500 Nm) for an effective work in harsh conditions.
CVT rotor drive

More opportunities

Depending on the version, the basic package includes an optical tailing elevator crop flow sensor (monitoring the flow through the tailings elevator). This offers a convenient way for the operator to monitor the operation of threshing and cleaning systems. The amount of incoming material is displayed in Adviser IV as absolute and relative values.
RSM tailing elevator crop flow sensor (1)
The system automatically controls the machine ground speed depending on crop yield, engine load, thresher and shoe losses, and rethreshing percentage, based on the settings made by the operator, in either of two modes:
  • constant preset speed;
  • constant preset feeder house load, with ground speed adjusted automatically for consistent thresher loading in varying field conditions;
  • constant preset speed;
  • constant preset feeder house load, with ground speed adjusted automatically for consistent thresher loading in varying field conditions.
RSM adaptive cruise control (option) (2)
The system provides automatic change of the cleaning fan speed and the gaps between the combs of the upper sieve and extension to compensate for the longitudinal slope of the field:
  • when moving uphill, the fan speed is automatically reduced, and the gaps of the sieves increase;
  • when going downhill, the fan speed is automatically increased, and the sieve gaps are reduced.
4D longitudinal slope compensation system (option) (3)

Specifications

Combine model

770/785

Power Stream grain header, 7/9 m
Cutterbar drive based on planetary gear case
Knife speed [stroke/min] 1 180
Reel-to-ground speed synchronisation system
Float Stream 700/900 close-cut header with flexible cutterbar, 7/9 m
Corn Stream 870/1270 corn header, 8/12 rows
Falcon 870/875/1270/1275 sunflower header, 8/12 rows
Sun Stream 1200/1050/920/780 sunflower header, 12/10.5/9.2/7.8m
Swa Pick 342/432 windrow pickup, 3.4/4.3m
Electrohydraulic ground contour following system
Multicoupler
Crop lifters
Header trailer
Cart hitch
Type chain-and-slat, with accelerator and adjustable angle of attack
Rugged design
Stone trap
Electrohydraulic ground contour following system
Multicoupler
Thresher width [mm] 1 500
Stone trap
Advanced Rotor System (ARS)
Rotor diameter [mm] 762
Total rotor length [mm] 3 200
Rotor drive hydromechanical
Rotor speed [rpm] 250 to 1 000
Concave wrap angle [deg.] 360
Total threshing and separation area [sq. m] 5.40
Cleaning sieve area [sq. m] 5.20
Cleaning fan speed [rpm] 335 to 1 050
In-cab electrical adjustment of sieves
Self-contained rotor-type rethresher
Grain tank capacity [L] 12 000
Minimum unload rate [L/s] 120
Unload height [mm] 5400
Vibrating agitators
Attachments for cop residue management 2-speed chopper/spreader, integrated chaff spreader
In-cab spread angle adjustment
Luxury Cab specification
Adviser IV information system
Automatic guidance system
Yield and moisture mapping system
Unloading area and rear view video monitoring system
Automatic Centralized Lubrication System
Tailings return assessment system
Agrotronic agromanagement platform
Transmission hydrostatic
Transmission 3 speeds
Road speed [km/h] 0 to 27
Drive wheel tyre type 900/60R32
Rear wheel tyre type 500/70R24
Removable tracks
Manufacturer/model

Cummins X12
(Stage V)

Cummins X12
(Stage 0)

Power rating [kW (h.p.)]

383
(520)

383
(520)

Fuel tank capacity [L]

850 (113)

850

Fuel meter system
Air compressor
Length/width/height (in the transport position, without header) [mm] 10 986 / 3 897 / 3 975
Weight (standard version, without header and fuel) [kg] 17 257 ± 516
  • Standard
  • Option
  • Not available
Financing

Leasing is an effective and attractive way of acquiring Rostselmash equipment.


Rostselmash Finance partner leasing companies can offer you programs to purchase agricultural machinery on the most favorable terms.


Exclusive leasing programs are also available. To get an individual financing offer contact your nearest Rostselmash dealer.

One of the most convenient and cost-effective ways of becoming the owner of Rostselmash agricultural equipment is to secure a loan from a bank.


Rostselmash Finance partner banks can offer you a wide range of loan programs tailored to your preferences and needs for purchasing Rostselmash agricultural equipment on the most favorable terms.


Contact your nearest Rostlsemash dealer to get an individual lending solution as well as necessary consulting support.

Rostselmash Finance partner insurance companies prepared for you the most comprehensive and cost-effective protection against a wide range of damage to your agricultural equipment. 


You can get more information about insurance programs from your nearest Rostselmash dealer.

Find a dealer nearby
Buhler Versatile Inc.
British Columbia, Winnipeg, Clarence, 1260

Warranty and service

Service for lower future costs

  • Wide network of service and sales partners you can rely on
  • Long commitment for proper warranty and post-warranty repairs in shortest time possible
  • Skilled personnel, special instruments and equipment, outfitted service facilities
warranty period
2 2 years or 600 hours
support during harvest season
24/7
Application for equipment
Application for equipment